Eventuri carbon intake for Audi S3 8Y 2020+ /Audi TTS model 2022 +

Description

The S3 8Y intake is a complete redesign of the stock intake all the way down to the turbo intake. Taking inspiration from our RS3 intake, we maximized the use of available space to create an intake that can accommodate all power levels, from stock to high-output setups with hybrid or full-frame turbos. This intake system was developed to deliver the highest possible flow while maintaining the lowest possible intake temperatures. Each component was designed to provide the turbo with a smooth, fluid path. The restrictive 73mm diameter intake tube is replaced with a larger 94mm diameter intake tube. The filter itself has an outside diameter of 192mm or 7,5″ with a filtration area of ​​over 110mm^000. The patented Venturi housing was designed to provide the maximum possible internal volume for the available space in the S2 engine bay and provides laminar flow to the turbo tube. Finally, the duct seals the filter opening on the front panel, but is not limited solely by the stock inlet feed. We raised the front of the duct to now provide an additional opening behind the hood, which equates to an additional 3-inch diameter hole for the intake. The resulting system can significantly vent the stock airbox while keeping intake temperatures to a minimum thanks to the sealed design.

The Eventuri difference

The Eventuri S3 8Y system uses our patented carbon fiber housings that provide an aerodynamically efficient airflow path from the filter to the turbo tube. This is not just another cone filter with a heat shield, but a unique design that evokes the Venturi effect.

Each intake system consists of:
Patented carbon fiber Venturi filter housing with 94mm outlet
Custom High Flow Dry Cone Filter
Carbon Fiber Intake Duct – Full Width
Silicone tube with 94mm inlet diameter
Machined Breather Adapter
Laser cut stainless steel brackets

Performance gain

Performance gain

Original vehicle: 10-13 hp, 12-15 Nm

Vehicle prepared: 15-20 hp, 25-30 Nm